The press automatic machine for compression of sleeves is intended for restoration of sleeves after use.
The press machine is a stationary device of a through type, one-position.
The press machine is installed in the stream, and is serviced by one or two workers, depending on the desired performance.
The press machine operates in automatic mode.
Installing the sleeve at the loading position and removing it from the dispensing position is done manually.
PAG-01 is a stationary flow-through device, which allows them with each (right or left) location in the stream.
The main unit of the automatic press machine is a hydraulic press, up to three hydraulic cylinders of which, using a set of hydraulic hoses, fluid (oil) is supplied from the hydraulic oil station. To the electric motors of the hydraulic oil pump pumps, voltage is supplied from the electric cabinet.
The control system is connected both with the electromagnets of the hydraulic and pneumatic equipment, and with measuring instruments, namely displacement sensors (rulers), pressure sensors, limit switches (reed switches). The control system controls all press drives, both when loading and unloading the sleeve, and when crimping